|
|
|
|
 |
|
|
|
|
|
IBM
PowerPC based Single Board Computer
|
|
|
|
|
|
This
is a single slot SBC powered by IBM’s PowerPC 750CXe
low power, high performance processor series, featuring
state-of-the-art Reduced Instruction Set Computer (RISC)
architecture. It offers superior computing power
providing up to 256 KB of L2 cache1, up to 600 MHz of
clock speed2, up to 512 MB of SDRAM with ECC Protection,
8 MB of Boot Flash, 32 MB of User Flash and 32 KB of
NVRAM. There is also an option for providing 128 MB of
High-Density Flash File for mass storage purposes.
The SBC has its internal architecture based on two
separate PCI buses, one operating at 66MHz and the other
at 33MHz, allowing the separation of the slower PCI
devices from the faster ones. This enables each of the
PCI devices to operate at their maximum speeds.
In addition to the high performance processor
architecture, the SBC provides multi-protocol interfaces
in the form of two dual redundant MIL-STD-1553B channels
(available optionally), two high-speed synchronous
serial ports, four standard UART serial ports and 16
digital I/O channels.
The SBC also features a watchdog timer, Real Time Clock
and comes equipped with one PMC module site
|
|
|
|
|
|
Pentium
M based Single Board Computer
|
|
|
|
|
|
This
is a single slot SBC powered by Intel Pentium-M
low power, high performance processor series. It offers
superior computing power providing up to 256 KB of L2
cache1, up to 600 MHz of clock speed2, up to 512 MB of
SDRAM with ECC Protection, 8 MB of Boot Flash, 32 MB of
User Flash and 32 KB of NVRAM. There is also an option
for providing 128 MB of High-Density Flash File for mass
storage purposes.
The
other peripheral Controllers/devices include like 2
ports 10/100/1000 Ethernet, 2 slots of EIDE, standard
RS232 Serial and Parallel ports.
|
|
|
|
|
|
Motorola
7457 based Single Board Computer
|
|
|
|
|
|
This
is a single slot SBC powered by Freescale semiconductors
PowerPC 7457 a G4 series, low power, high performance
processor, featuring state-of-the-art Reduced
Instruction Set Computer (RISC) architecture. It offers
superior computing power by providing up to 512 KB of L2
cache, up to 2 MB of external L3 cache interface, up to
1 GHz of clock speed, up to 512 MB of SDRAM, 32MB System
Flash, 256 MB of User Flash, 1GB of NAND flash and 32 KB of NVRAM.
In
addition to the high performance processor architecture,
the SBC provides multi-protocol interfaces in the form
of MIL-STD-1553B channels, four high-speed
asynchronous/synchronous serial ports supporting RS232,
422/485 and SDLC/HDLC protocols and 16
digital I/O channels. Other onboard peripherals include
2 10/100 ethernet ports, 1 gigabit ethernet port, Ultra
SCSI, 3 USB ports, Four 32 bit Timers. The SBC also features a
Watchdog timer, Real Time Clock and comes equipped with
one PMC slot
|
|
|
|
|
|
VME
Based Discrete I/O Card
|
|
|
|
|
|
This
is a 6U VME Discrete I/O modules that are designed to
provide users with a high degree of reliability and
flexibility to meet input-output requirements. The VME-DIO
boards provide an economical method for isolation and
interfacing of I/O signals to the VME bus. Optical-relays,
which are built-in, are provided for each I/O channel.
These eliminate the expenses incurred due to the usage of
external relay panels. They are ideally suited for
stringent military and airborne applications. On-board
relays isolate all the inputs, outputs and the VMEbus from
each other against all sorts of transients emanating from
ground
loops
etc.
The
VME-DIO-64 provides 32 channels of isolated inputs and 32
channels of isolated outputs. The voltage levels supported
are TTL and Open Collector voltages.
The
VME-DIO-32 provides 16 channels of isolated inputs and 16
channels of isolated outputs. The voltage levels supported
are TTL and Open Collector voltages
Also
available on the board are 2 serial asynchronous RS-422
channels. These have a programmable baud rate up to 115.2
k/Bauds.
|
|
|
